Uninterrupted use of automated equipment can quickly age, but we hope it will create more value. How to extend the life of automation equipment?
At work, each component's temperature has its own normal range. If the temperature of the cooling water is between 80 and 90 ° C, the temperature of the hydraulic fluid in the hydraulic drive system is between 30 and 60 ° C, which will accelerate the wear of the parts, deteriorate the lubricating oil and change the properties of the material.
Reduce the effects of mechanical impurities
Mechanical impurities from non-standard automation equipment suppliers generally refer to non-metallic materials such as metals and dust, as well as construction machinery produced from scrap metal and metal products. Wear yourself. When these impurities enter the machine and reach the contact surface of the machine, the damage is significant. Not only do they cause relative movement of the blocks, they accelerate the wear of the parts, they also scratch the corresponding surfaces, destroy the lubricating oil film, heat the parts and degrade the oil. When the mechanical impurities in the lubricating oil increase to 0.15%, the wear rate of the first stage of the engine will be 2.5 times larger than the normal value, and the life of the bearing will be reduced by 80% after the entry of the impurity particles by 90%. Therefore, in difficult and complex environments, construction machinery must use high-quality auxiliary components, as well as lubricants and greases to prevent harmful impurities and mechanical protection work in both locations must ensure the proper function of the function. Prevent various impurities from entering the machine. Repair the faulty machine as much as possible at the usual service location. Protective measures should also be taken during on-site maintenance to prevent dust and other components from becoming contaminated prior to replacement.